Race Car Fuse/ Relay Panel Block 3 Way LS Swap Custom Universal Drag Harness LSX

Description

***THE "ORGINAL" Race Fuse Panel - My relays all use 14 gauge wire for power and the correct terminal blocks. Others on ebay are only using 18 guage wire and their terminal blocks are only good for 10-15amps.**** I Have over 500 Panels sold!
Need something custom? Message me!
Race Car Fuse/ Relay Panel Block
3 Way
Hot Rod . Condition is New. Will consist of 3 Relays for 3 different circuits in your project car! One side will be all the outputs (light bar, fans, ECU Etc), other end goes to switch side. Same panel I currently run in my race car!
Each relay is rated for 40 amps, with the entire fuse block rated for 100 amps.
Panel Measures approx. 3 x 12 inches
Comes with Fuses.
All you need to do is run power and ground to the Panel. Slot 1/2 is first circuit, 3/4 second, 5/6 third. WHITE wire goes out to switch, and YELLOW is out to accessory.
Last Picture had detail on how to wire in.
Questions please ask, can walk you through it! (Use Instagram for fast response)
Please allow 3-4 days build time!
*Will come with cover for fuses, however I run without the cover to make connecting Positive and ground cables easier. But still can be connected with cover with a little finessing. Want to make the panel as small as possible to fit under dash.*
*Disclaimer: Offroad Use only, not responsible for your wiring.*